CRIMPFLEX® 2.54mm pitch housings:

0F: standard housing for removable connection with all types of 0,635mm square or round pin headers. Side to side and end to end stackable (not polarized, no latch)

0L and 0M: latching housings for easy mating and unmating to a walled pin header (industry standard locking system)

0JH: new latching housing with extra mechanical protection to prevent the latch from breaking or tearing in case of strong vibration. 4 chamfers for an easier insertion guiding.
Through holes: Possible insertion of the contacts on the opposite side to the latch or on the latch side.

0D: detent style housing  with retention feature

1L: latching receptacle housing for the locking of 0M or 0L housings with 12410 square male pins

4F: dual row housing for connection of a double row flexcable jumper onto a 2 row 0,635mm square or round pin header

7F10: low profile housing for right angle connection in high density packaging

2E and 4E: low profile housings for either single or double row walled pin header

CRIMPFLEX® 1.27mm pitch housings:

M0F: standard 1 row housing for removable connection with all types of 0,40mm square or round pin headers. Side to side and end to end stackable (not polarized, no latch).

M0J: 1 row latch style housing for efficient and easy mating and unmating to a latch wall pin header (industry standard locking system). Extra mechanical protection to prevent the latch from breaking or tearing in case of strong vibrations. 4 chamfers for an easier insertion guiding.

M0JR: 1 row latch style housing. Same as M0J but with reverse side latch position.

M4F: equivalent to M0F with 2 rows for connection of a double row flexcable jumper onto a 2 rows 0,40mm square or round pin header.

M4J: equivalent to M0J with 2 rows for connection of a double row flexcable jumper onto a 2 rows 0,40mm square or round pin latch wall header.