Microflex flexible harness

Microflex™ interconnection is a flat cable harness with screw fixing for high vibration environment. This jumper mates with CMM 220 connector for high mechanical resistance. This solution has been tested to meet MIL-DTL-55302F performances. 3 versions are available Female-Female, solderpin-female and octopus multi branches.  

Features:

  • Board to board, board to wire, wire to wire
  • From 04 to 60 signal contacts, 2mm pitch
  • Clear and easy cabling system
  • weight reduction up to 60% vs round cable
  • Flexible cable and high life expectancy 
  • Vibration resistance 
Microflex Hi-Rel Flexible Harnesses
Nicomatic creates a Lighter, high-performance alternative to round cables and the perfect complement to compact, lightweight CMM 220 connectors.   Nicomatic’s Microflex™ cable accessories offer customers a robust and reliable alternative to heavier, bulkier round cab...
Read article
Military Grade Crimp Connector for Printed Electronics
As printed electronics has matured, especially with the ability to embed components onto electronics, more and more applications are being found in defense and aerospace for membrane switches, sensors, and other specialty printed electronics. Until now, crimp contacts for printed electronics hav...
Read article
MicroFlex Hi-Rel Solution
With more and more printed ink and flex pcb circuits being used in Mil/Aero applications, Nicomatic offers a new alternative with the Micro-Flex. This new "two in one technology" ensures a high mechanical link and electrical continuity between 2mm pitch CMM micro-connectors and flat...
Read article

Minimum Breakdown Voltage = 1000 Vrms
Withstanding voltage = 750 Vrms
Rated Voltage = 250 Vrms (also called operating voltage)


It is a hi-rel flexible connection system used in MIL-AERO applications mainly. NICOMATIC provides an alternative to classic round cables
- 2mm pitch
- 2 rows, from 04 to 60 signal contacts
- Board to board, board to cable, cable to cable versions
- 3A contacts


Flexibility: 10 000 000 cycles, bending 1/4'' radius
 


The housing is in PPS with glass fiber classified UL 94 V0


Yes. Vibration test according to MIL-DTL-55302F §3.16 and §4.16.10 Test condition III 147.1m/s2 (15gn) @
ambient condition of use according to the Qualification test report conditions.

Test results (Female-Female & Octopus) :
No electrical interruption greater than one microsecond during vibration test, no sign of loosening,
fracture or other deterioration to the mounting hardware after the test.


It depends.

Female-female or Octopus versions:
-55°C to +105°C for Polyester cable
-55°C to +125°C for Polyimide cable
Solderpin-female versions:
-40°C to +105°C for Polyester cable
-40°C to +125°C for Polyimide cable


Yes, but it is available upon request such as many other options: higher temperature, other material, controlled
impedance & LVDS... Contact us.


Up to 60 LF contacts are available.


As the solderpin side is soldered, it generally does not comply with high vibration.

Therefore we recommend to use the Female - Female or Octopus versions.

The Solderpin - Male can also be used in high vibration but needs to pass thru a dedicated customer process on PCB to protect the soldered part.


Yes. According to the test routines other than MIL, our technical features reach higher performances: up to 20 gn (Female - Female & Octopus).

 

High performance micro-connectors
Connectors for flexible circuits & PCB
FFC Cables & Jumpers
Metal domes & components
Custom solutions
Display tutorial
Contact webmaster